3PC ball valve consists of three body pieces: left body, right body and central body. It can be repaired inline without removing the whole valve from pipeline. Widely used for medium & high pressure piping system.

1PC: One piece body, reduced port, low cost, low pressure, cannot disassemble.
2PC: Two pieces body, full port, general use, need to remove whole valve for maintenance.
3PC: Three pieces body, full port, robust structure, inline maintenance, higher pressure, longer service life.

1000WOG (PN16), working pressure up to 16bar at room temperature.1000WOG (PN16)

PTFE seat: 0℃ ~ 120℃. If over 120℃, we can offer other seat material.

Water, compressed air, natural gas, oil, weak acid & alkali. Not for strong corrosive medium.

Standard 2PC ball valve is full port, low flow resistance.

For saturated steam, please advise temperature and pressure. PTFE seat is limited for high temp steam.

Yes. Every valve will pass air leakage test before packing.

Small MOQ available. Mixed sizes in one order acceptable.

Each valve in plastic bag, then small box, carton outside. Wooden pallet optional.

Do not over-tighten the male thread when connecting. Use thread seal tape properly. Avoid heavy impact on valve body.

Yes, OEM & ODM available. Logo on handle or body.

Yes, floating ball design, bidirectional sealing.

When disassembling, please release pipeline pressure first. Do not disassemble the valve under pressure.

Do not over-tighten the male thread when connecting. Use thread seal tape properly. Avoid heavy impact on valve body.

Both horizontal and vertical installation are okay. Handle can be adjusted position.

12 months warranty against manufacturing defect. Not cover damage from wrong operation.

Do not over-tighten thread when installation; avoid impact. Regular inspection for long time service.

The general product specifications list sizes from 1/2” to 2” (DN15–DN50). The accompanying size chart currently covers DN15–DN50; please verify the specific dimensions for the size you require.

The original bill of materials includes 201, CF8, and CF8M valve body options, as well as a variety of ball and internal component materials. Specific configuration combinations should be confirmed prior to ordering.

Standard stock consists of BSPT; however, the original specifications list BSPT, BSPP, and NPT threads. Please provide the thread standard and nominal size when requesting a quote so that availability can be confirmed.

The accompanying general data indicates an operating pressure of 1.6 MPa and an operating temperature range of 0°C to 120°C. Suitability of this product for specific fluids and temperatures must be confirmed separately.

The accompanying operating instructions recommend against leaving the valve in a partially open position for extended periods, as high-velocity fluid may erode the PTFE seat.

We maintain a stock of 5,000 BSPT valves for standard orders; other thread types require customization, with a production capacity of 50,000 units within 15 days.

Every valve undergoes rigorous quality inspection, including testing of the material, threads, seals, and valve body, and is backed by a one-year warranty within the normal operating range of the medium.”””